## TANCET Syllabus

Here is the syllabus for all the departments of Anna University to which TANCET examination is conducted for getting the admission to ME\MBA\MCA courses of affiliated college.

For TANCET Question Paper - CLICK HERE

SYLLABI FOR THE TANCET ENTRANCE TEST/EXAM:

Here is the entire syllabus for TANCET examination for ME, M.TECh, MBA and MCA. This includes branches like ECE, CSE, IT, MECH, EEE, etc.

PART – I
ENGINEERING MATHEMATICS (Common to all Candidates)

i) Determinants and Matrices : Solving system of equations – Rank of the Matrix – Eigenvalues
and eigenvectors – Reduction of quadratic form to canonical form.

ii) Calculus and Differential Equations : Partial derivatives – Jacobians – Taylor’s expansion –
Maxima and Minima. Linear ordinary differential equations with constant coefficients – Simultaneous first
order linear equations with constant coefficients. Formation of partial differential equation (PDE) –
Solution of first order PDE – Solution of linear higher order PDE with constant coefficients.

iii) Vector Calculus : Double and triple integrations and their applications – Gradient, Divergence, Curl
and Laplacian – Green’s, Gauss divergence and Stroke’s theorem.

iv) Functions of Complex Variables and Complex Integration : Analytic functions – Conformal
Mapping – Bilinear transformation – Cauchy’s integral theorem and integral formula – Taylor and Laurent
Series – Singularities – Residues – Residue theorem and its applications.

v) Transforms : Laplace Transform – Inverse transforms – Application to solution of linear ordinary
differential equations with constant coefficients. Fourier integral theorem – Fourier transform pair – Sine
and Cosine transforms. -transform – Inverse Z–transform – Solution of difference equations using Z–
transform.

vi) Numerical Methods : Solution of linear system by direct and iterative methods – Interpolation and
approximation – Numerical Differentiation and Integration – Solving Ordinary Differential Equations.

vii) Applied Probability : Probability and Random variables – Standard Discrete and Continuous
distribution – Moments – Moment generating function and their properties. Two-Dimensional Random
Variables – Covariance – Correlation and Regression.

PART – II
BASIC ENGINEERING & SCIENCES (Common to all Candidates)
i) Applied Mechanics : Law of Mechanics – Lame’s theorem – Forces, Moments and Couples –
Displacement, velocity and Acceleration – Friction – Moment of Inertia.

ii) Mechanical Engineering : Laws of thermodynamics – Open and closed systems – Equation of state
– Heat and Work.

iii) Physics : Sound – Latices – Ultrasonic flaw detector – X-ray radiography – Interference Fringes –
Planck’s quantum theory – Laser and Fibre Optics.

iv) Material Science : Fracture – Magnetic and Dielectric materials – Conductor and Semi conductor
materials – Ceramic and Super conductor materials.

v) Civil Engineering : Fluid Statics and Dynamics – Boundary Layer – Pumps and Turbines –
Environmental Pollution.

vi) Electrical Engineering : Ohm’s law – Kirchoff’s law – A.C. circuits – D.C. machines – Transformers
– Synchronous machines – Instrumentation.

vii) Computers : Computer organisation – Architecture – Arrays – Pointers – User defined function –
C program.

viii) Chemistry : Adsorption – Chromatography – Chemical kinetics – Electrochemistry – Spectroscopy –
Fuels and Combustion.

PART - III
1. CIVIL ENGINEERING & GEO INFORMATICS
i) Structural Engineering : Mechanics: Stress-Strain Relationships – Principal stresses and Principal
strain in two dimension and three dimension. Composite Bars – Composite Beams – Elastic Constants.
Beams and Bending – Shear Force and Bending Moment Diagrams – Flexural and Shear Stresses. Slope
and Deflection of Beams. Thin and Thick Cylinders. Torsion. Theories of Failure – Unsymmetrical Bending
– Curved Beams – Theories of Columns. Combined Direct and Bending Stresses.

Structural Analysis: Static and Kinematic Indeterminancy – Energy Principles – Deflection of pin jointed
plane frames – rigid frames. Classical Method of Analysis of indeterminate structures (Slope deflection
and Moment Distribution) – Matrix Method. Arches and Suspension Bridges – Influence Line for
Determinate and Indeterminate Structures. Plastic Analysis of Structures.

Building Materials: Cement - Concrete – properties of ingredients- Mix Design- Quality Control- Special
Concrete – Concreting Methods- Brick – Brick Masonry – Stone – Timber – Steel.
Concrete Structures: Design Methods – Limit State Design for beams, slabs, columns and footings –
retaining walls – Water Tanks. Prestressed Concrete – Principles – Methods – Losses – Deflection –
Design.

Steel Structures: Steel Sections – Connections – Design of Tension and Compression Members – Beams,
Column Bases – Plate Girders and Trusses.

ii) Soil Mechanics and Foundation Engineering : Soil Mechanics: Nature of soil – phase relationships
– Soil classification; Soil water – static pressure – effective stress principle; permeability – seepage;
Stress distribution in soil – Consolidation (Terzaghi’s one dimension consolidation theory); Compaction
shear strength of soil – Mohr – Coulomb theory – determination of shear strength by different methods;
Slope stability analysis – protection measures.
Foundation Engineering: Site investigation – scope and objectives – drilling techniques – depth and
spacing of boreholes – sampling Techniques – penetration tests (SPT and SCPT) – plate load test –
selection of foundation; Foundation types – shallow foundation – bearing capacity (Terzaghis Theory and
BIS formula) – allowable bearing pressure – bearing capacity from field tests – settlement of foundation –
allowable settlement – Codal provisions; Design of foundations – Isolated, combined and raft foundation;
Pile foundations – static and dynamic pile driving formulae (Engineering News and Hiley method) – Pile
groups – capacity and settlement – Codal provisions – pile load test – negative friction on piles; Earth
pressure theories – Earth pressure on retaining walls – stability analysis of retaining wall.

iii) Transportation Engineering : Highway Planning: Road Classification, Geometric Design of
Highways, Construction of Earth, WBM, Bituminous and concrete roads, Design of flexible and rigid
pavements. Drainage of roads, maintenance of roads.
Railways, Airways, Docks and Harbour Planning: Railway alignment, components of permanent way,
geometric design Airport planning, components of airport, site selection, planning for terminal building,
runways. Harbour planning, components of harbour, inland water transport.
Traffic Engineering: Traffic characteristics, Traffic surveys, Traffic Signals, Road markings and signs.

iv) Water Resources Engineering : Fluid Mechanics and Hydraulics: Properties of fluids. Fluid statics
and relative equilibrium. Basic concepts of fluid flow - kinematics and dynamics. Concept of system and
control volume application to continuity, momentum and energy equations. Dimensional analysis and
model studies. Laminar and turbulent flow through pipes. Boundary layers. Steady uniform and gradually
varied flow in open channels. Rapidly varied flows. Turbines and pumps and positive displacement
pumps.
Hydrology and Ground Water: Hydrometeorology. Hydrologic cycle. Precipitation and its measurements.
Abstractions. Runoff estimation. Hydrograph analysis. Unit Hydrograph. Hydrologic extremes floods and
droughts. Rainwater harvesting. Properties of aquifer. Groundwater development. GEC norms. Well
hydraulics. Steady and unsteady flows. Ground water quality.
Irrigation Engineering: Irrigation system. National water policy. Components of irrigation network. Design
of lined and unlined channels. Waterways, head works, gravity dams and spillways. Design of weirs on
permeable foundation. Soil water relations. Crop water requirements. Irrigation scheduling and methods.
Duty, delta and base period. Irrigation water quality. Irrigation water management. Participatory
approach.
v) Environmental Engineering : Water and Waste water Engineering: Water requirements; water
demand, quality standards; Development of water supply source, conveyance system; basic unit
processes and operations for water treatment; water distribution; sewage characteristics; sewage
treatment, primary and secondary treatment of sewage, sludge disposal, sewage disposal.
Air Pollution and Control: Types of pollutants, their sources and impacts, air pollution meteorology, air
pollution control, air quality standards and limits.
Noise Pollution and Control: Impacts of noise, permissible limits of noise pollution, measurement of noise
and control of noise pollution.

vi) Surveying And Remote Sensing : Surveying: Chain survey-traversing-plotting: compassesbearings
-plane table-leveling-bench marks-temporary and permanent adjustments-reduction: contouring
and volumes-theodolites - Gale’s table-lay out - setting out works-curve ranging-mine surveyingtecheometric
survey-triangulation-base line-corrections-trigonometric leveling - errors and sourcesclassification
of errors-equation-level nets-astronomical survey-practical astronomy-photogrammetry-
EDM-hydrographic survey-river.
Electronic survey- infrared EDM-microwave system-modern positioning systems - trilateration.
Remote Sensing: Satellite system- EMR interaction with each feature, spectral signature - image
characters -interpretation keys- Image enhancement, filters, classification.-accuracy assessment-thematic
maps.
GIS and Cartography: Cartography-map projection-map design-map compilation-generalisation-map
production- software and hardware GIS-data types-data base types-raster and vector-topology-data
input-data analysis-DEM and TIN-data output-applications.

2. EARTH SCIENCES
i) Physical Geology and Geomorphology : Weathering process, kinds, products. Internal structure
of the earth, fundamentals of plate tectonics. Landforms produced by River, winds, glacier and sea.
Drainage pattern, Drainage Index , geomorphic features.

ii) Mineralogy, Petrology, Stratigraphy, Paleontology and Structural Geology : Physical
properties of Industrial minerals classification, origin and description of Igneous, sedimentary and
Metamorphic rocks. Origin of Himalayas major earth geological events through time scale. Origin of life,
types of fossils evolution of mammals & Man. Joints, Folds, Faults and structures.

iii) Economic Geology, Ore Geology, Geochemistry : Origin, occurrence and distribution of
Economic mineral deposits-Iron, manganese, gold, zinc, graphite, lead, coal and petroleum deposits.
Ore-dressing, ore-reserves, estimation. Major elements, application in environmental studies REE-its
implication in genesis/ provenance of rocks.

iv) Remote Sensing, Geophysics and Hydrogeology : Sensors & Platforms- Indian Remote Sensing
– Spectral system characteristics of rocks & minerals – Photogeology – Photogrametry - Hydrogeology –
Groundwater – occurrence, movement, Aquifer, field parameters & Lab methods of estimations.

v) Engineering Geology, Environment Geology and Marine Geology : Engineering properties of
Rock. Geological investigation required for Dam, Tunnel, highways and building constructions.
Renewable and non-renewable resources, pollution. Continental and marine environmental studies.
Ocean features, physical, chemical & biological resources of the ocean.

3. MECHANICAL, AUTOMOBILE & AERONAUTICAL ENGINEERING
i) Mechanics : Statics of Particles, Equilibrium of Rigid Bodies, Properties of Surfaces and Solids, Dynamics of Particles, Friction and Elements of Rigid Body Dynamics – Basics of Mechanisms, Kinematics of Linkage Mechanisms,Kinematics of Cam Mechanisms, Gears and Gear Trains, Friction, Force Analysis, Balancing and Vibration.

ii) Strength of Materials and Design : Stress, Strain and Deformation of Solids, Transverse Loading on Beamsand Stresses in Beams, Deflection of Beams, Energy Principles, Thin cylinders and spherical resells Torsion -Fundamentals of Design for Strength and Stiffness of Machine Members, Design of Shafts and Couplings, Design of Fasteners and Welded Joints, Design of Springs and Engine Parts, Design of Engine parts, Bearings and Flywheels, Design of Transmission Systems for Flexible Elements, Spur Gears and Parallel Axis Helical Gears, Bevel, Worm Gears and Crossed Helical Gears, Design of Gear Boxes, Design of Cam, Clutches and Brakes.

iii) Material Science and Metallurgy : Constitution of Alloys and Phase Diagrams, Heat Treatment, Ferrous and Non ferrous Metals, Non-Metallic Materials, Mechanical Properties and Testing, Crystal Defects and Strengthening of Materials Conducting and Semiconducting Materials, Magnetic and Dielectric Materials, Nuclear Physics, Superconducting and New Engineering Materials.

iv) Thermodynamics : Basic Concepts and First Law, Second Law, Entropy and Availability, Properties of Steam,Psychometric, Ideal and Real Gases and Thermodynamic Relations, Fuels and Combustion, - Gas Power Cycles,Stream Turbines, Internal Combustion Engines, Internal Combustion Engines Testing and Performance, Gas Turbines, - Steam Nozzle, Air Compressor, Refrigeration and Air-Conditioning, Boilers, Co-generation and Waste Heat Recovery.

v) Heat Transfer : Conduction, Phase Change Heat Transfer and Heat Exchangers, Radiation, Mass Transfer-Refrigeration Cycle, Refrigerants, System Components and Balancing, Psychrometry, Air Conditioning Systems,Unconventional Refrigeration Cycles.

vi) Production Technology : Foundry Technology, Hot & Cold Working, Forging, Advances in Forming Process,Principles and Applications of Joining Processes, Theory of Metal Cutting, Centre Lathe and special Purpose Lathes,Reciprocating Machines, Milling Machines and Gear Cutting, Abrasive Process, Broaching, CNC Machine Tools and Part Programming.

vii) Automotive Engines : Engine Construction and Operation, SI Engine Fuel System, Cooling and Lubrication System, Combustion and Combustion Chambers, Two Stroke Engines, Diesel Engine Basic Theory, Fuel Injection System, Air Motion, Combustion and Combustion Chambers, Supercharging and Turbocharging, Diesel Engine Testing and Performance.

viii) Automotive Transmission and Pollution : Clutch and Gear Box, Hydrodynamic Drive, Planetary Gear
Boxes, Automatic Transmission Applications, Hydrostatic and Electric Drive - S.I. Engine Combustion and Emissions,CI Engine Combustion and Emissions, Control Techniques for Reduction of SI and CI Engine Emission, Test Procedure & Instrumentation for Emission Measurement and Emission Standards.

ix) Aerodynamics : Basic Fluid Mechanics, Two Dimensional Inviscid Incompressible Flow, Airfoil Theory, Subsonic Wing Theory, Laminar and Turbulent Flow, Fundamental Aspects of Compressible Flow, Shock and Expansion Waves, Two Dimensional compressible Flow, High Speed Flow Over Airfoils, Wings and Airplane Configuration.

x) Aerospace Propulsion : Fundamentals of Gas Turbine Engines, Subsonic and Supersonic Inlets for Jet
Engines, Centrifugal and Axial Flow Compressors, Combustion Chambers for Jet Engines, Turbines for Jet Engines, Nozzles for Jet Engines, Ramjet Propulsion, Hypersonic Airbreathing Propulsion, Chemical Rocket Propulsion, Advanced Propulsion Techniques.

4. ELECTRICAL & ELECTRONICS ENGINEERING AND INSTRUMENTATION ENGINEERING (EEE & IE)
i) Electrical Circuits and Fields : KCL, KVL, Nodal & Mesh analysis, transient response of D.C and A.C
networks; sinusoidal steady-state analysis; resonance in electrical circuits; concepts of ideal voltage and
current sources, network theorems, driving point admittance and transfer functions of two port network,
three phase circuits; Fourier series and its application; Gauss theorem, electric field intensity and
potential due to point, line, plane and spherical charge distribution, dielectric, capacitance calculations for
simple configurations; Ampere’s and Biot-Savart’s law, inductance calculations for simple configurations.

ii) Electrical machines : Single phase transformer-equivalent circuit, phasor diagram, tests, regulation
and efficiency; three phase transformer-connections; auto transformer; principles of energy conversion,
windings of rotating machines: D.C generators and motors-characteristics, starting and speed control,
armature reaction and commutation; three phase induction motors-performance characteristics, starting
and speed control; single-phase induction motors; synchronous generators- performance, regulation;
synchronous motors-starting characteristics, applications, synchronous condensers; fractional horse
power motors; permanent magnet and stepper motors.

iii) Power Systems : Electric power generation – thermal, hydro, nuclear; transmission line parameters;
steady-state performance of overhead transmission lines and cables and surge propagation; distribution
system, insulators, bundle conductors, corona and radio interferences effects; per-unit quantities; bus
admittance and impedence matrices; load flow; voltage control and power factor correction; economic
operation; symmetrical components, analysis of symmetrical and unsymmetrical faults; principle of over
current, differential and distance protections; concepts and solid state relays and digital protection; circuit
breakers; principles of system stability-swing curves and equal area criterion.

iv) Control systems : Principles of feedback; transfer function; block diagram; steady-state errors;
stability-Routh and Nyquist criteria; Bode plots; compensation; root loci; elementary state variable
formulation; state transition matrix and response for Linear time Invariant systems.

v) Power Electronics and Drives : Semiconductor power devices-diodes, transistors, thyristors,
triacs, GTO, MOSFETs and IGBTs-static characteristic and principles of operation; triggering circuits;
phase control rectifiers; bridge converters-fully controlled and half controlled; principles of choppers and
inverters, basic concepts of adjustable speed dc and ac drives.

vi) Digital Electronics : Digital Logic Theory: Number systems-Combinational logic circuits-Minimisation
of Boolean functions-IC families-Arithmetic circuits, Multiplexer & decoders-Sequential circuits-Flip flops,
counters, shift registers, Schmitt trigger, timers and multivibrators.
Microprocessor : General 8 bit microprocessor Architcture-8085, 8086 processor – Architecture, Memory,
I/O interfacing, Instruction set, Addressing modes, Timing diagram & delays, Machine cycles, Interrupts,
counters, Assembly language programming.
Microcontrollers: 8 bit microcontroller – 8051 architecture, bus configuration, Instruction sets,
programming & applications.

vii) Digital Signal Processing : Analog signals-sampling & Aliasing-Discrete time signals & systems-
LTI systems- Convolution sum-Difference equation representation-Z Transform & its Inverse-Discrete
Fourier series & Fourier transform-Radix 2 FFT – Decimation in me and frequency- Inverse DFT using
FFT-Analog Butterworth & Chebyshev filter design-IIR & FIR filter design and Realisation.

viii) Computer Control of Processes, Networks : State models and state equations-controllability &
observability-pole assignment-discrete data system – state space representation-stability-data hold, Z &
modified Z transform – Pulse transfer function-programmable logic controllers.
Data networks-switching OSI, Data link control, Media access protocol-BISYNC, SDLC, HDLC, CSMA/CD,TCP/IPBridges, routers, gateways, Ethernet and Arcnet configuration.
ix) Communication Engineering : Modulation and demodulation systems – Types of transmission
lines – losses – standing waves – Ground wave and space wave propagation – Digital communication
concepts – Data Communication codes, serial and parallel interface – Network protocol – Types of
satellites – Advantages of optical fibre communication.

x) Measurements, Instrumentation and Transducers : Measurement of R, L and C-Bridges,
potentiometers & galvanometers- Measurement of voltage, current, power, power factor and energy-
Instrument transformers, Q meter, Waveform Analysers – Digital voltmeter, multimeter-Time, phase and
frequency measurements-Oscilloscope – display and recording devices – Noise and interference in
Instrumentation.

xi) Industrial Instrumentation : Measurement of displacement, stress, strain, force, torque, velocity,
Acceleration, Shock, vibration, humidity, viscosity & density- Pressure, temperature, flow & level
measurement.

xii) Analytical Instrumentation : Spectro Photometers-Spectral methods of analysis-source detectors
and applications – Ion conductivity-sampling systems, ion selective electrodes, conductivity and pH
meters- Analysers – Chromatography – NMR & X ray spectroscopy – GM and proportional counters-Mass spectrometer.
Units and standards-Calibration methods-Errors-Transducer classification, static characteristics,
mathematical mode, zero, I and II order transducers – Response to different inputs-variable Resistance,
Inductance and capacitance transducers-Piezo electric, Magnetostrictive, IC and smart sensors- Digital,
Fibre optic, Hall effect and feedback transducers.

5. ELECTRONICS AND COMMUNICATION ENGINEERING - ECE
i). Circuit Analysis: DC Circuit analysis, Thevenin’s and Norton’s equivalent circuits, Sinusoidal steady
state analysis, Transient and resonance in RLC circuits.
Electronic Devices: Diodes, Bipolar Junction Transistors, FET, MOSFET, UJT, Thyristor. Electronic
Circuits: Small signal amplifiers using BJT and FET devices, Large signal amplifiers, Power supplies,
Feed back amplifiers, Oscillators, Pulse shaping circuits. Digital Electronics: Logic gates,
Combinational circuits, Sequential circuits. Linear Integrated Circuits: Operational amplifiers and its
applications, PLL, Voltage regulators, A/D and D/A converters. Measurements and Instrumentation:
Transducers, Digital Instruments, Display and Recording systems. Microprocessor and its
applications: Microprocessors-8085 and 8086 architectures and interfaces, Micro-controller and
applications.

ii). Electromagnetic Fields: Static Electric and Magnetic fields, Time varying Electric and Magnetic
fields, Maxwell equations. Transmission Lines and Networks: Transmission line equations,
impedance matching, Filters. EM waves and waveguides: Guided waves, Rectangular and cylindrical
waveguides. Antennas and Propagation: Aperture antennas, arrays, Propagation of radio waves.
Microwave Engineering: Microwave tubes, semiconductor devices, Passive components, Microwave
measurements.

iii). Communication Theory and Systems: AM, FM and PM, Sampling and Quantisation, PCM, DM,
ADM, Multiplexing. Digital Communication: Base band signaling, Band pass signaling, Error control
coding, Spread spectrum techniques. Computer Communication Networks: Definition of layers,
data link protocols, Network interconnection. Message routing technologies, End-End protocols. Optical
Communication: Optical Fibers, optical transmitters and receivers.

iv). Signals and Systems: Continuous time signals and systems-Fourier Transform, Laplace
transform, Discrete time signals and systems-DTFT, DFT, Z-Transform. Digital Signal Processing: IIR
and FIR filters, Realisation and implementation, Quantisation effects. Control Systems: Transfer
function, Time and frequency response analysis, Stability analysis, state variable analysis

6. PRODUCTION AND INDUSTRIAL ENGINEERING - PIE
i) Basic Mechanisms and Elements of Design : Mechanisms, Friction, Gearing and Cams, Balancing,
Vibration, Fundamentals of Design, Design of Basic Machine Elements, Design of Mechanical drives,
Design of Automotive components, Recent Advances.

ii) Casting, metal forming and metal joining processes : Casting Processes, Welding Processes,
Special Casting Processes, Testing of Castings & Weldments - Fundamentals of Metal Forming, Forging
and Rolling, Extrusion and Drawing Processes, Sheet Metal Forming Processes, Recent Advances,
Mechanisms, Friction, Gearing and Cams, Balancing, Vibration, Fundamentals of Design, Design of Basic
Machine Elements, Design of Mechanical drives, Design of Automotive components, Recent Advances.

iii) Tool Engineering, Machine tool operation, Metrology and Inspection : Mechanics of Metal
Cutting, Tool Material, Tool Wear and Tool Life, Gear Manufacture, Concept & Programming of CNC
machines, Advanced CNC programming & Tooling - General Concepts of measurements, Linear and
Angular measurements, Measurement of Surface Finish Measuring Machines, Metrology of Screw Thread
& Gears, Computer Aided Inspection and Laser Metrology - Strength and rigidity of machine tool
structures, Slideways, Spindles and spindle supports, Machine Tool Dynamics.

iv) Engineering Materials, and Computer Aided Manufacturing : Introduction and Constitution of
Alloys and Phase Diagrams, Heat Treatment, Ferrous and Non Ferrous Metals, Mechanical Properties and
Testing, Welding and Foundry Metallurgy, Manufacturing Processes for Plastic, Mechanical, Chemical and
Electro-chemical energy based processes, Electrical Energy based Waste Processes, Thermal Energy
Process, Rapid Prototyping and Rapid Tooling – polymer Matrix Composites, Metal Matrix Composites,
Ceramics Matrix Composites, Advances in Polymers & Composites.

v) Product and Process Design, Design of Jigs and Fixtures and Press Tools : Computer Aided
Design, Computer Graphics Geometric Modelling, Product Design Concepts, Recent Advances, Process
Planning, Estimating, Costing and Elements of Cost, Analysis of Overhead Expenses, Estimation of Costs
for Forging, Casting and Welding, Estimation of Machining Time, Purpose Types and Functions Of Jigs
and Fixtures, Jigs, Fixtures, Press working Terminologies and Elements of dies and Strip Layout, Design
and Development of Dies.

vi) Operations Research : Linear Programming, LP Extensions, Networks, Inventory Models, Dynamic
Programming, Decision Analysis, Game Theory, Waiting Line Models, Markov Processes.

vii) Operations Management : Forecasting, Aggregate Planning, Capacity Management, Production
Activity Control, Estimation and Costing, Product Cost Estimation, Software Cost Estimation, Costing
Methods, Cost Analysis for Planning and Control.

viii) Quality Control Reliability and Maintenance : Quality Concepts, Statistical Process Control,
Process Capability Analysis, Advanced Control Charts, Acceptance Sampling, Reliability Concepts, Failure
Data Modeling, Reliability Prediction and Modeling, Reliability Management, Risk Assessment,
Maintenance Concept, Maintenance Models, Maintenance Logistics, Total Production Maintenance, Fault
Diagnosis.

7. COMPUTER SCIENCE & ENGINEERING AND INFORMATION TECHNOLOGY - CSE & IT
i) Applied Probability And Operations Research : Random Processes, Probability Distributions,
Queuing Models and Simulation, Testing of Hypothesis, Design of Experiments.

ii) Discrete Mathematical Structures : Formal Language and Automata - Graph Theory.

iii) Compiler Design : Optimization – Code Generation – Implementation – Principles of Programming
Languages – Programming Paradigms.

iv) Operating Systems And System Software : Process Management, Storage Management, I/O
Systems, Design and Implementation of LINUX OS, assemblers, Loaders, Linkers, Macro Processors.

v) Distributed Systems : Communication and Distributed Environment, Distributed Operating Systems,
Distributed Shared Memory, Protocols, Fault Tolerance and Distributed File Systems, Distributed Object
Based Systems.

vi) Programming And Data Structures : Problem Solving Techniques, Trees, Hashing and Priority
Queues, Sorting, Graph, Heap Search.

vii) Algorithm Analysis And Design Techniques : Dynamic Programming, Greedy Algorithms,
Advanced Algorithms, NP Completeness and Approximation Algorithms.

viii) Microprocessors And Microcontrollers - Computer Architecture And Organisation : Digital
Fundamentals, Combinational Circuits, Synchronous and Asynchronous Sequential Circuits, Instruction Set
Architecture(RISC,CISC,ALU Design), Instruction Level Parallelism, Processing Unit and Pipelining,
Memory Organisation.

ix) Digital Signal Processing : FFT, Filter Design.

x) Computer Networks : Data Communication Systems, Applications.

xi) Database Management Systems : Relational Model, Database Design, Implementation Techniques, Distributed Databases, Object Oriented Databases, Object Relational Databases, Data Mining
and Data Warehousing.

xii) Software Engineering Methodologies : Software Product and Processes - Software Requirements Management - Requirement Engineering, Elicitation, Analysis, Requirements Development and Validation, Requirements Testing - Object Oriented Analysis And Design – Modular Design, Architectural Design, User Interface Design, Real Time Software Design, System Design, Data acquisition System - Software Testing And Quality Assurance - SQA Fundamentals, Quality Standards, Quality Metrics, Software Testing Principles, Defects, Test Case Design Strategies, Software Quality and reusability, Software Project Management, Software Cost Estimation, Function Point Models, Software Configuration Management, Software Maintenance.

xiii) Artificial Intelligence : Intelligent Agents, Search Strategies, Knowledge Representation, Learning, Applications.

xiv) Mobile Computing : Wireless Communication Fundamentals, Telecommunication Systems,
Wireless Networks.

xv) Security In Computing : Program Security, Security in Operating Systems, Database and Network Security, Scientific Computing, Information Coding Techniques, Cryptography, Network Security.

8. CHEMICAL ENGINEERING, CERAMIC TECHNOLOGY AND BIOTECHNOLOGY
i) Fluid Mechanics and Particle Technology : Classification of fluids, flow patterns, manometry,
continuity equation, Navier-Stokes’ equation, Bernoulli equation, Dimensional analysis, Flow through
pipes, Boundary layer concepts, Flow through fixed and fluidised beds, pumps – classification affinity
laws, performance curves. Characteristics of solids, size analysis, Screening, Storage, Conveyance, Size
reduction, Classifier, Centrifuges, Cyclones. Filtration, Mixing and agitation.
ii) Chemical Technology and Process Calculations : Gas calculations, Material balance and Energy
balance – Steady and unsteady state, Humidity and Saturation, Combustion, Thermo chemistry,
Role of Chemical Engineers in process industry, Cement, glass and ceramic industries, paper industry- Oil,
soap, detergent industries, petroleum refining and petrochemicals- Polymer industry, Fertilisers, Food
industry and other important process industries.
iii) Thermodynamics and Kinetics : Laws of thermodynamics, PVT behavior of fluids, Thermodynamic
formulations, compression of fluids, Phase equilibria – Application of the correlation and prediction. Free
energy change and reaction equilibria. Refrigeration – principles, performance. Reaction rate – laws,
theories, analysis. Design of reactors, Factors affecting design, Thermal reactors and rates of heat
exchanges. Non-ideal reactors, Hetrogenous reactors and solid catalysts, Gas- solid catalytic reactors,
Gas- solid non-catalytic reactors, Gas-Liquid reactors.
iv) Heat and Mass transfer : Modes of Heat transfer. Heat conduction- steady and unsteady state,
Natural and forced convection, Heat transfer to fluids with phase change, heat transfer coefficients,
evaporation, heat exchangers – design and construction.
Diffusion, Mass transfer coefficients, humidification, drying, absorption, distillation, extraction, leaching,
crystallisation, adsorption and ion exchange, analogies.
v) Process Control and Computer Applications in Chemical Engineering : Open loop systems,
closed loop systems, Frequency response, Advanced control systems, Instrumentation. Application of
spread sheet packages in Chemical engineering, Process flow sheeting, Development of software for
design of equipments. Dynamic programming in Chemical engineering.
vi) Organic and Surface Chemistry : Carbohydrates, Oils, Fats, and Waxes, Heterocyclic
compounds, proteins, dyes and dyeing, pharmaceutical chemistry. Adsorption – types, adsorption of
gases over solids, isotherms, applications, ion exchange, adsorption chromatography, Catalysis – types,
Equations.
vii) Electro, Polymer and Corrosion Chemistry : Factors influencing Corrosion, types of corrosion,
corrosion control. Laws of migration of ions, conductometric titrations, advantages, galvanic cells,
reversible and irreversible cells, Standard electrodes, electrode potentials, electrochemical series, Nernst
equation. Polymeric materials, Teflon, polyamide, Nylon66, Kevlar, polyesters, polyethylene teryphthalate,
poly butylene tetra phthalate, polycarbonates, bakelite, reinforcement, composites. Introduction to
spectroscopic analysis, Molecular spectroscopy, IR, NMR, Mass Spectrometry.
viii) Environmental Pollution and Control : Various methods of reduction of pollution, types of
pollution, Air pollution – sources and effects- control techniques, Water pollution - sources and effectscontrol
techniques, Soil pollution - sources and effects- control techniques and Solid waste disposal.
ix) Bioprocess Engineering : Analysis of STR, Analysis of other configurations, Bioreactor scale-up,
Modeling and simulation of Bioprocesses, Bioreactor considerations in Enzyme systems.
x) Cell and Molecular biology : Cells, Cell lines, Cell culture, Cell Organelles and its functions, types
of Cell divisions, cell cycle and its regulation mechanism. Transport Mechanism (passive, Active, ATPase
pumps and Na+ /K+ pumps), Receptors, Signal Transduction, Models of Signal Amplification Secondary
messengers, Structure of Nucleic Acids, Replication, Transcription, Translation and DNA repair mechanism
in Prokaryotes and Eukaryotes. Promoters, Enhancers and Transcription factors. Genetic Codes and Lac &
trp operons.
xi) Biochemistry and Microbiology : Structure, function and metabolism of Carbohydrates, lipids
Nucleic Acids and proteins. Enzymes and its mechanism. Electron Transport Chain system, High energy
compound and reducing equivalents. History of Microbiology, Classification of Microorganism, structural
organisation and multiplication of Microorganism. Physical and Chemical control of Microorganisms,
Primary and Secondary metabolites and their applications.
xii) Genetic Engineering : Genes, control of gene expression, Restriction enzymes, Vectors
(prokaryotic and Eukaryotic) construction of cDNA and genomic Library. Screening of DNA libraries, PCR, RACE PCR, RAPD, RFLP, AFLP, Site directed mutagenesis, Methods of Nucleic acid sequencing. Cloning vectors in plants, Transgenic and Knockout animals.
xiii) Immunology : Immune system, immunity, lymphoid organs, antigens, adjutants, types of immune
response. Activation and different ion of T-cells and B-Cells, Antibodies, Genes and generation of
diversity, monoclonal antibodies. MHC APC, regulation of T-cell and B-cell responses. Immunity to
viruses, Bacteria fungi and parasites, cytokines, complements, immunosuppression, allergy and
hypersensitivity. Vaccines, Transplantation, Tumor Immunology, Autoimmunity and Autoimmune
disorders.
xiv) Bioinformatics : Search engines and algorithms, data management, data technology, biological
databases and their uses. Pair wise sequence alignment (local and global), multiple sequence alignment,
dot matrix, dynamic programming and Bayesian methods. BLAST, FASTA, machine learning and Hidden
Markov models. Phylogenetic tree analysis. Bimolecular and cellular computing, microarray analysis and
system Biology.
xv) White wares, ceramic processing and fine ceramics : Quarrying of ceramic materials, size
reduction, mechanical separation, mixing and conveying, powder characterisation, Classification of
whiteware products, heavy clayware, tests and quality control.
xvi) Glass, Cement, Refractory and Ceramic coatings : Formation and Structure of glass,
preparation of glass batch, glass melting process, Special glasses, annealing, different types of
refractories, different types of cement, concrete, properties of cement and concrete.

9. TEXTILE TECHNOLOGY
i) Fibre Science and Technology : Cotton varieties and their properties; silk – pre and post cocoon
operations; varieties of silk and their properties; varieties of wool and their properties; properties of other
natural fibres.Production and properties of viscose rayon and other regenerated fibers.Requirements of fibre forming polymers; structural principles of polymeric fibres; fluid flow during spinning; technology of melt, wet, dry, dry jet wet, liquid crystal and gel spinning of polymeric fibres.Production, properties and applications of PET polyester, nylon 6, nylon 66, polyacrylonitrile and polypropylene.
Spin finishes; drawing; heat setting; crimping and texturisation; tow to top converters and tow to staple
converters. Structural investigation of fibres; study of moisture absorption, tensile behaviour, torsional rigidity and flexural rigidity, and optical, frictional, electrical and thermal properties of fibres.
ii) Yarn Engineering : Yarn numbering systems- direct, indirect and conversions.
Description and working of short staple spinning machinery - blow-room machinery, card, comber
preparatory machines, comber, draw-frame, speed-frame, ring-frame; calculation of process parameters
and process efficiencies; production calculations.
Methods of mixing and blending; two-folding of yarns; two for one twist principle; man-made fibre
processing.
Principle and details of yarn formation in condensed yarn spinning, rotor spinning, friction spinning, air-jet
spinning and other new spinning systems; structure of yarns produced from different spinning systems.
Control of waste, productivity and quality.
iii) Fabric Engineering : Fundamental concepts in winding, modern automatic winders; yarn clearing;
winding synthetic and blended yarns and sewing threads; weft winding; Creels used in warping
machines; beam and sectional warping machines; Sizing materials and recipes: size preparation and
application; control systems used in sizing machine; sizing filament yarns; combined dyeing and sizing;
energy conservation in sizing; process control in weaving preparation; preparation of warp beam for
weaving.
Yarns quality requirements and preparations for high speed weaving machines.
Principles and limitations of various shedding, picking mechanisms; power required for picking; timing
different mechanisms; automation and modern developments in weaving machine; cloth formation; loom
accessories; process control in weaving.
Cloth geometry; cover factor; concepts in fundamental and advanced woven fabric designs.
Quality and preparation of yarn required for knitting; basic weft knitted structures and their production;
needle control in weft knitting machines; factors affecting the formation of loop; effect of loop length and
shape on fabric properties; process control in knitting; warp knitting fundamentals.
Web forming techniques for dry method of web preparation; production of bonded fabrics by mechanical,
chemical and thermal methods; productions of spun bonded and melt blown fabrics; end uses of bonded
fabrics.
iv) Chemical Processing : Chemical structure and chemical properties of natural and man-made
fibres; singeing; desizing; scouring; bio preparatory operations; Mercerisation; bleaching; heat setting;
processing machines.
Adsorption isotherms; dye-fibre interaction; properties and application of direct, azoic, vat, sulphur,
reactive, acid, mordant, metal-complex, disperse and basic dyes; dyeing of blends; garment dyeing;
assessment of colour fastness.
Fundamentals of colour measurement; whiteness and yellowness indices; colour matching;
spectrophotometers.
Methods and styles of printing; printing machines; printing paste; printing with direct, reactive, acid and
disperse dyes and pigments.
Calendering; crease proofing; anti-shrinking; softening; felting and non-felting of wool; bio-polishing;
assessment of finishes; assessment of eco-friendliness of textiles; finishing of knits; garment washing.
v) Quality Evaluation : Textile quality parameters; online and off line testing methods.
Measurement of length and length uniformity, fineness, strength, maturity, trash content, moisture
content of fibres using conventional and modern testing methods; advanced fibre information systems,
high volume testing; measurement of lap, sliver and roving irregularity.
Assessment of count, twist, hairiness, strength and extension, evenness, imperfection, friction, crimp
rigidity, work of rupture, fatigue, abrasion resistance of yarn; classification of yarn faults.
Determination of fabric construction parameters; assessment of tensile, bursting and tear strengths, lowstress
mechanical properties, permeability, insulation properties, durability, comfort and handle properties
of fabrics; grading of fabrics based on defects.
Sampling; statistical significance tests; control charts.

10. LEATHER TECHNOLOGY
i) Pre Tanning Operations : Hides & Skins – Histological characteristics structure of hides & skins
defects – curing & preservation methods – Animal by products – soaking, unhairing, liming, deliming,
bating, pickling, depickling and degreasing– Their objectives & principles involved. Biochemistry of
collagen and other substances – chemicals & auxiliaries used in pre-tanning operations – General
pretanning processes for manufacture of different types of heavy and light leathers - Process control in
pretanning – Ecofriendly pretanning operations – Physical and chemical testing - Standards and quality
control measures in pretanning. By products of animal and tannery operations.
ii) Tanning Operations : Tanning materials – Vegetable, mineral and organic - their classification –
chemistry & Technology of tanning materials & methods – characterisation manufacture & analysis of
various tanning materials. Theory & mechanism of vegetable, chrome, Aluminium, Zirconium, Iron,
Titarium, Aldehyde, Oil and other organic tanning. Various unit operations involved in tanning processes
their objectives & principles – cleaner processing options – Analysis & characterisation of various types of
leathers - Physical and chemical testing - Standards and quality control measures in tanning operations.
iii) Post Tanning and Finishing Operations : Retanning, dyeing – fatliquoring and finishing
operations – Their objectives & principles – chemicals used for the above unit operations – Syntans,
fatliquors, dyes, dye-auxiliaries, pigments, acrylic and protein binders, wax emulsion, fillers, topcoats, NC,
CAB lacquers and lacquer emulsions, feel modifiers, their nature & properties in finishing – machinery &
methods for post tanning and finishing operations – upgradation methods – chemical and physical
properties required for various finished leathers – physical & chemical testing of finished leathers –
Tannery Effluent treatment –Effluent treatment plant - Liquid and solid waste management.
iv) Leathers & Leather Products : Various types of leathers – upper, sole, garment, leather goods,
sports & specially leathers – their characteristics. Leather supplement and synthetics - Design &
manufacture of footwear, leather goods & garments. Leather Economics and Industrial Management –
Project feasibility reports – organisation & management of leather sector – marketing & export of leather
& products - Machines for leather products manufacture - mechanics & operation - IT applications for
leather & product design. Professional Ethics and human values.

11. ARCHITECTURE
i) Building Materials, Construction and Technology : Lime, Brick, Stone, Clay products; Timber,
Industrial timber; Paints and varnishes, Concrete, Special concrete and light weight concrete; Ferrous
metals; non ferrous metals; Glass; Plastics; Eco friendly materials; Thermal insulation materials and
acoustic materials. Construction techniques and practices using the above listed materials; Damp and
water proofing; Pest control;; Construction systems and equipment; Pre- stressed concrete and Tensile
Structures; Grids domes; folded plates; Flat Slabs. Low cost construction & appropriate technologies.
ii) History of Architecture : Indian architecture- Hindu and Islamic; Indo Saracenic; Secular
architecture of the princely states; Colonial and Post Independence Architecture; Works of masters such
as Charles Correa; B V Doshi; Ananth Raje; Raj Rewal; Laurie Baker; Nari Gandhi; Kanvinde.
Western architecture- Ancient Greek and Rome; Early Christian; Gothic and Renaissance; Baroque; Neo
Classicism; Chicago School and development of skyscraper; Modern architecture: Art and Crafts; Art
Noveau; Expressionism and Cubism; Bauhaus; International style; Post Modernism and De
constructivism; Critical Regionalism; Theories and projects of F L Wright; Le Corbusier; Gaudi; Gropius;
Aalto; Mies; Eisenmann; Zaha Hadid; Soleri; Hasan Fathy; Ando; Bawa; Gehry; Libeskind; Toyo Ito; Louis
Khan; Tschumi; Greg Lynn; Assymptote.
iii) Theory and principles of Architecture : Elements and ordering principles; Organisation of form
and space; Design methodology and Creative thinking; Pattern language; Contemporary process:
Diagrams, Shape grammar, fractals, Digital hybrid, Liquid architecture.
iv) Building Services : Water supply and distribution systems; water and waste management;
Sewerage system; Electrical systems; Illumination and lighting; Air conditioning; Fire Safety; building
automation and IBMS.
v) Building Science : Climate responsive architecture; design of solar shading devices; acoustics &
building design; Architecture & Energy- Active & passive solar architecture, Day lighting & natural
ventilation, Landscape designs; Landscape & environment control.
vi) Housing, Urban Design and Town Planning : National Housing Policy; Indra Awas Yogana;
Housing standards; housing projects in India; Urban morphology of early and contemporary cities; Case
Studies on urban revitalisation from developed and developed economies; Planning concepts- Patrick
Geddes, Ebeneezer Howard, Le Corbusier, C A Perry; Urban planning, regional planning and Urban
renewal in the Indian context.

12. PHYSICS AND MATERIAL SCIENCE
i) Mechanics, Heat and Sound : Vectors – equilibrium - moment of a force – Newton’s laws of
motion – gravitation – work – energy – power – Impulse and momentum – collitions – recoil.
Thermometry of thermal expansion – calorimetry and specific heats – transfer for heat – thermal process
of matter - Law and processes of thermodynamics - Applications. Travelling waves – oscillations – spring
– simple pendulum – forced oscillations – resonance – sound waves –Acoustic Phenomena and its
applications- Doppler effect.
ii) Light and Properties of Matter : The nature and propagation of light – reflection of refraction at
plane surfaces – interference – diffraction – polarisation. Elasticity – Stress-strain diagram --
hydrostatics – Pressure in a fluid – Pumps – Archimede’s principle – Surface tension – Contact angle –
Capillarity - hydrodynamics - Bernoulli’s equation – Applications and viscosity – Poiseuille’s law –
Stokes law – Reynolds number.
iii) Electricity and Magnetism : Coloumb’s law – Gauss’s law – Applications - electrostatic potential –
capacitors – dielectrics - current – resistance – emf – Kirchoff’s law – thermo electric effect – applications.
Magnetism - magnetic effects of current – motion of charge particles in magnetic field – cyclotron –
magnetic forces on current carrying conductor – Hall effect – electromagnetic induction –Faraday’s law –
Lenz’s law – eddy current – Inductance – mutual and self inductance – magnetic properties of matters –
diamagnetism – paramagnetism – ferromagnetism - domains– Hysteresis - alternating current – circuits
containing resistance, inductance or capacitance – transformer.
iv) Modern physics : Emission and absorption of light – thermionic emission – photoelectric effect –
atomic spectra - atom models – molecular spectra – dual nature of matter and radiation – nuclear
structure – properties – natural radioactivity – nuclear stability - nuclear reactions – fission – fusion –
fundamental particles – high energy physics.
v) Solid State Electronics : Structure and bonding in solids - properties of solids – semiconductors –
intrinsic – extrinsic – PN junction – diode characteristics – Zener diode – LED, laser diode – Photodiode –
Transistor – action and characteristics – amplifier – oscillator – basic logic gates.
vi) Electron theory of solids: Classical free electron theory – density of states- electron in a periodic
potential – origin of energy band gap – electrical conductivity – thermal conductivity – Widemann-Franz
law
vii) Dielectric and magnetic materials: Different types of polarisation – Internal field – Clausius-
Mosotti equation- dielectric breakdown- applications of dielectric materials – Different types of magnetic
materials – domain theory of ferromagnetism – hysteresis - hard and soft magnetic materialsapplications
of magnetic materials.
viii) Superconducting materials: General properties of superconducting materials – Meissner effect
– types of superconductors – Hi Tc superconductors- applications
ix) Nanomaterials: Preparation – properties – applications – Carbon nanotubes.

13. MATHEMATICS
(i) Algebra
Algebra: Group, subgroups, Normal subgroups, Quotient Groups, Homomorphisms, Cyclic Groups,
permutation Groups, Cayley’s Theorem, Rings, Ideals, Integral Domains, Fields, Polynomial Rings.
Linear Algebra: Finite dimensional vector spaces, Linear transformations – Finite dimensional inner
product spaces, self-adjoint and Normal linear operations, spectral theorem, Quadratic forms.
(ii) Analysis
Real Analysis: Sequences and series of functions, uniform convergence, power series, Fourier series,
functions of several variables, maxima, minima, multiple integrals, line, surface and volume integrals,
theorems of Green, Strokes and Gauss; metric spaces, completeness, Weierstrass approximation
theorem, compactness.
Complex Analysis: Analytic functions, conformal mappings, bilinear transformations, complex
integration: Cauchy’s integral theorem and formula, Taylor and Laurent’s series, residue theorem and
applications for evaluating real integrals.
(iii) Topology and Functional Analysis
Topology: Basic concepts of topology, product topology, connectedness, compactness, countability and
separation axioms, Urysohn’s Lemma, Tietze extension theorem, metrization theorems, Tychonoff
theorem on compactness of product spaces.
Functional Analysis: Banach spaces, Hahn-Banach theorems, open mapping and closed graph
theorems, principle of uniform boundedness; Hilbert spaces, orthonormal sets, Riesz representation
theorem, self-adjoint, unitary and normal linear operators on Hilbert Spaces.
(iv) Differential and Integral Equations
Ordinary Differential Equations: First order ordinary differential equations, existence and uniqueness
theorems, systems of linear first order ordinary differential equations, linear ordinary differential
equations of higher order with constant coefficients; linear second order ordinary differential equations
with variable coefficients, method of Laplace transforms for solving ordinary differential equations.
Partial Differential Equations: Linear and quasilinear first order partial differential equations, method
of characteristics; second order linear equations in two variables and their classification; Cauchy,
Dirichlet and Neumann problems, Green’s functions; solutions of Laplace, wave and diffusion equations
using Fourier series and transform methods.
Calculus of Variations and Integral Equations: Variational problems with fixed boundaries;
sufficient conditions for extremum, Linear integral equations of Fredholm and Volterra type, their iterative
solutions, Fredholm alternative.
(v) Statistics & Linear Programming
Statistics: Testing of hypotheses: standard parametric tests based on normal, chisquare, t and Fdistributions.
Linear Programming: Linear programming problem and its formulation, graphical method, basic
feasible solution, simplex method, big-M and two phase methods. Dual problem and duality theorems,
dual simplex method. Balanced and unbalanced transportation problems, unimodular property and u-v
method for solving transportation problems. Hungarian method for solving assignment problems.

14. SOCIAL SCIENCES
i) Geography : Settlement geography-rank-size relationship, urban environment- physical and social,
regional delimitation, central place theory, urbanisation in India and Tamilnadu, relationship, concept and
types of region, regional development planning in India, globalisation and economics reforms and
competitiveness.
ii) Sociology : Social institution, society, community, social roles, norms, status, values, social structure
in India, social change and its relevance to economic development, urbanisation as a way of life, social
problems of developed and developing countries, impact of urbanisation on society and rural
development, impact of IT industry on society and development.
iii) Economics : Agglomeration economics- internal, external and urbanisation economics, economic
base of cities- meaning, types of economic base and methods of identifying economic base, multiplier
concept, and approaches of development, Indian national economy –five year plans, environmental
economics, economic geography of India. Land economics and industrialisation policy, SEZs, IT, ITES
industries
iv) Social work : Role of social worker and NGO’s in development – community, rural, social, and
national level; public participation in developmental framework- city, regional, and national level,
awareness programme on policies, counseling- rational emotive therapy, behaviour modification therapy,
family counseling, group work- treatment group, task group, community work- rural and urban
community developments/micro credit/micro finance\SHGs

## SAIL Exam Placement Question Paper

SAIL previous year question/placement papers for download. SAIL- Steel Authority of India entrance examination question paper in PDF format. Here you can find questions papers, interview questions, answers and solved model question papers for SAIL entrance exam for various subjects like electronics (ECE), electrical (EEE), computer science (CSE), instrumentation, mechanical, chemical, civil and chemical engineering, etc. Also you can find question paper for reasoning, general knowledge, aptitude and English papers. SAIL recruitment or Placement question papers either in MCQ (Multiple Choice Question Answers)

SAIL Recruitment Examination is conducted by SAIL every year for various posts like Management Trainees, Deputy Managers, Operator Cum Technician - OCTT, Attendant Cum Trainee - ATT-AITT.

All the Best for your examination.

You can also prepare with GATE papers as syllabus will be nearly same. Please follow the link below for Solved papers of GATE exam from last 10 years.

Books for SAIL Exam:

REASONING
APTITUDE
ENGLISH
Mechanical Papers:
Electronics Papers - EC:
Electrical - EEE:
Chemical Engineering:
Instrumentation:

SAIL, a Maharatna Company, is the leading steel-making company in India with a turnover of Rs.51,866 crore (FY13-14). SAIL is in the process of modernizing and expanding its production units, raw material resources and other facilities to maintain its dominant position in the Indian steel market. To man front-line executive positions in its Plant/Units/Mines, SAIL invites applications for 246 posts of Management Trainee (Technical) and 100 posts of Management Trainee (Administration) in E-1 grade from young, energetic, result oriented and promising talent in the country.

SAIL recruits students from various fields. The pattern for Placement Paper for Technical Posts is given below. There is a written test and a personal interview. The written test comprises of the following five sections:

SAIL Exam consist of  -
1. Reasoning (45 ) ,
2. Quantitative. ques.( 35 ),
3. General knowledge ( 35 ),
4. English Comp ( 35 ).,
5. Technical Question ( 100 ).

The number of questions in the exam is not fixed. It varies year to year. However the number of sections and the time allotted is always the same. The time duration of the written test is 2 hours 30 minutes. Apart from the overall cut off there will be sectional cut offs also.

List of Posts:
• Management Trainee
• Technician
Upper Age: 30 years as on 1.2.2015, i.e., not born earlier than 1.2.1985.

Minimum Qualification :

Management Trainee (Technical)

Degree in Engineering (full time) with 65% marks (average of all semesters), in the disciplines of Mechanical, Electrical, Metallurgy, Electronics & Instrumentation, Ceramics, Civil, Computer Science, Mining or Chemical Engineering. For Computer Science discipline, MCA (3 years full time) with 65% marks (average of all semesters) are also eligible.

For HR, Marketing and Materials: Bachelors’ degree in any discipline with 60% marks (average of all subjects of all years) with at least two years full time MBA/PG Diploma in Management with 60% marks in Human Resources/Personnel Management & Industrial Relations /Personnel Management /Masters in Human Resources & Organizational Development for HR discipline, Marketing for Marketing discipline and Production/Operations/Materials/Logistics/Supply Chain Management for Materials discipline.

For Management Trainee (Technical) posts, candidates having degree in related disciplines as given below can also apply against the respective discipline:

Mechanical
Mechanical & Automation/ Mechatronics/ Industrial and Production Engineering/ Industrial Engineering/ Mechanical Production and Tool Engineering/Production Technology Manufacturing Engineering/ Manufacturing Process and Automation/ Production Engineering/ Power Engineering

Electrical
Electrical & Electronics / Electrical, Instrumentation & Control / Power Systems & High Voltage Engg./ Electrical Machine/ Electronics & Power/ Power Electronics/ Power Plant Engineering / Energy Engineering

Electronics & Instrumentation
Electronics & Power / Electronics & Instrumentation / Instrumentation & Control/ Electrical, Instrumentation & Control / Instrumentation & Automation Electronics & Telecommunication/ Electronics Design & Technology/ Applied Electronics/Power Electronics/ Electronics & Communication/ Electrical & Electronics/ Industrial Electronics/ Mechatronics/ Electronics & Control

For Finance : CA/ICWA

IMPORTANT DATES
1. Starting date for submitting applications through website 26.2.2015
2. Closing date for submitting applications through website 18.3.2015
3. Display of final reconciled candidature status 25.3.2015
5. Tentative date of written examination 10.5.2015
6. Transparency/ display of individual scorecard ( tentative) 1 month after declaration of final results

Keywords: SAIL recruitment Notification 2014 or Application form 2014, SAIL Exam Admit Card, SAIL Exam Syllabus 2014 , SAIL Exam Eligibility 2014, SAIL Answer Keys 2014, SAIL Exam Result 2014, SAIL Exam Center 2014, How to crack SAIL Exam 2014, Preparation Tips SAIL exam 2014, SAIL Question Bank or SAIL Reference Books or SAIL Study Materials.

## Anna University Question Paper for EIE

Anna university question papers for Electronics And Instrumentation Engineering ( EIE ) department/branch semester examination. Download old papers, solved question banks, important questions with answers, Model question papers, important 16marks and 2marks questions with answer, syllabus, reference book for each subject for B.E / B.Tech 2008, 2010 and 2013 regulation for Anna university Chennai, Coimbatore, Tiruchirappalli/Trichy, Tirunelveli and Madurai affiliated colleges.

Find previous year questions papers listed subject wise below in the order first - 1st, second - 2nd, third - 3rd, fourth - 4th, fifth - 5th, sixth - 6th, seventh - 7th and eighth - 8th semesters. All documents are in PDF format for downloading.

Hope this will help you in getting good marks in your semester examination. ALL THE BEST.

FEEL FREE TO PUT YOUR COMMENT and REQUEST IN THE COMMENT BOX BELOW. THANK YOU.

First  & Second Semester Papers:
Third Semester - 3rd:

MA6351 Transforms and Partial Differential Equations
GE6351 Environmental Science and Engineering
EE6301 Digital Logic Circuits
EC6202 Electronic Devices and Circuits
EE6303 Linear Integrated Circuits and Applications

Electrical Measurements - EI6301
Regulation 2008\2010 Papers:

Transforms and Partial Differential Equation - MA2211
Environmental Science and Engineering - GE 2021
Environmental Science and Engineering - GE2211
Electrical Machines - EI2201
Electronic Devices and Circuits - EI2203
Data Structures and Algorithms - EE2204
Electrical Measurements - EI 2202
Fourth Semester - 4th:

Control Systems - EE2253
EI2251 Industrial Instrumentation - I 3 0 0 3 3.
EI 2252 Transducer Engineering 3 0 0 3 4.
EI 2253 Digital logic Circuits 3 1 0 4 5.
Linear Integrated Circuits and Applications - EE2254
EI 2254 Applied Thermodynamics 3 1 0 4
Numerical Methods - MA2264
MA6459 Numerical Methods
CS6456 Object Oriented Programming
EI6401 Transducer Engineering
EE6403 Discrete Time Systems and Signal Processing
EI6402 Electrical Machines
EI6403 Applied Thermodynamics and Fluid Dynamics

Fifth Semester - 5th:
1. EC2312 Microprocessor and Microcontroller 3 0 0 3 2.
EC2315 Communication Engineering 3 0 0 3 3.
Object Oriented Programming - CS2311
EI2301 Industrial Electronics 3 0 0 3 5.
EI2302 Analytical Instruments 3 0 0 3 6.
EI2303 Industrial Instrumentation – II 3 0 0 3

EE6502 Microprocessors and  Microcontrollers
IC6501 Control Systems
EE6503 Power Electronics
EI6501 Analytical Instruments
EI6502 Industrial Instrumentation – I
CS6659 Artificial Intelligence
CS6303 Computer Architecture
CS6401 Operating Systems
EI6001 Data Structures and Algorithms

Sixth Semester - 6th:
1. EI2351 Modern Electronic Instrumentation 3 0 0 3 2.
EI2352 Process Control 3 1 0 4 3.
EI2353 Digital System Design 3 0 0 3
Digital Signal Processing - EC2314/EC2361
5. CS2364 Embedded System 3 0 0 3
Biomedical Instrumentation - EI2311
EI6601 Modern Electronic Instrumentation
EI6602 Process Control
EI6603 Industrial Instrumentation – II
EC6651 Communication Engineering
EE6602 Embedded Systems
EI6002 Power Plant Instrumentation
EI6003 Instrumentation  in Petrochemical Industries
IT6005 Digital Image Processing
IC6601 Advanced Control System
EE6003 Optimisation Techniques

Seventh Semester - 7th:
1. EI2401 Industrial Data Networks 3 0 0 3 2. EI2402 Logic and Distributed Control System 3 0 0 3 3. EI2403 VLSI Design 3 0 0 3 4. EI2404 Fibre Optics and Laser Instruments 3 0 0 3 1. CS2351 Artificial Intelligence 3 0 0 3 2. CS2071 Computer Architecture 3 0 0 3 3.
Operating Systems - CS2411
4. CS2070 Visual Languages and Applications 3 0 0 3
5. EI2021 Power Plant Instrumentation 3 0 0 3
6. EI2022 Instrumentation in Petrochemical Industries 3 0 0 3
7. EI2023 Micro Electro Mechanical Systems 3 0 0 3
GE2023 Fundamentals of NanoScience 3 0 0

EI6701 Industrial Data Networks
EI6702 Logic and Distributed Control System
EC6601 VLSI Design
EI6703 Fibre Optics and Laser Instruments
EI6704 Biomedical Instrumentation
EE6007 Micro Electro Mechanical Systems
EE6008 Microcontroller Based System Design
EE6006 Applied Soft Computing
IC6701 Digital Control System
GE6081 Fundamentals of Nanoscience
IC6002 System Identification and Adaptive Control
Eighth Semester - 8th:

9. EC2055 Digital Image Processing 3 0 0 3 10.
EC2056 Advanced Communication Engineering 3 0 0 3
11. EC2057 Advanced Digital Signal Processing 3 0 0 3 12.
EE2023 Robotics and Automation 3 0 0 3
Total Quality Management - GE 2022
Professional Ethics in Engineering / Professional Ethics And Human Values - GE2025
IC2401 Digital Control System 3 0 0 3 16.
CS2461 Applied Soft Computing 3 0 0 3
Principle of Management - MG2351
MG6851 Principles of Management
EI6801 Computer Control of Processes
GE6757 Total Quality Management
GE6075 Professional Ethics in Engineering
IC6003 Principles of Robotics
EC6002 Advanced Digital Signal Processing

## Electrical Measurements 3rd MJ13 080300004

B.E/B.TECH. DEGREE EXAMINATION, MAY/JUNE 2013
Third Semester
Electronics and Instrumentation Engineering
080300004-ELECTRICAL MEASUREMENTS
(Regulation 2008/2010)

PART A-(10*2=20 marks)

1. How can the range of instrument be extended in PMMC instruments?
2. Define calibration.
4. Define creeping.
5. Give the classifications of AC potentiometers.
6. Define ratio error.
7. Define megger.
8. When is the Wheatstone bridge balanced?
9. Which types of detector is used in ac bridges?
10. What is the use of Campbell Bridge?

PART B-(5*16=80 marks)

11. (a) Briefly explain the construction and working principles of PMMC instruments.
Or
(b) With the neat diagram explain the principle and working of dynamometer type instruments
Also mention its advantages.

12. (a) Briefly explain the working principle of electrodynamometer type wattmeter with a neat
Sketch and necessary equation.
Or
(b) Explain the step by step procedure for calibrating LPF wattmeter by phantom loading.

13. (a) Explain the current and potential transformer with equivalent and vector diagram.
Or
(b) Write short notes on:
(i) DC potentiometer
(ii) Drysdale type potentiometer.

14. (a) Write necessary derivation explain the Kelvin double bridge circuit for very low value
Resistance measurement.
Or
(b) What is megger? Explain the construction and working principle of megger.

15. (a) Explain the measurement of inductance using Maxwell-wein's bridge circuit.
Or
(b) Write short notes on :
(i) Vibration galvanometer
(ii) Campbell bridge.